| AJAX B 16L | 2MT bench drill, speeds 380 - 3400rpm (8) | just in and not yet cleaned picture | £245 |
| BOXFORD PD5 | bench drill | picture | £145 |
| BOXFORD | 2MT pedestal drill | English made machine | £245
|
| BOXFORD | late model 2MT pedestal drill | English made machine picture | £425 |
| CORONA POLLARD | pedestal 1 morse, 1/2"drill chuck | | £275
|
| ELLIOT NO.1 | pedestal drilling machine, speeds 340 - 2580 | good table | £275
|
| ELLIOT NO.5E | 4MT pedestal drilling machine, speeds 58 - 369 | just in picture picture2 | £1275 |
| FOBCO STAR | speeds 475 - 4260 | picture | £375 |
| MEDDINGS M10 | sensitive drilling machine | picture | £325 |
| MEDDINGS 2MT | pedestal drill | 240 volts picture | £325 |
| MEDDINGS MF4 2MT | back geared pedestal drill | very nice machine with almost spotless table picture | £475 |
| PROGRESS NO.1 | 1/2" bench drill | picture | £145 |
| PROGRESS NO.1S | 1/2" pedestal | | £175
|
| PROGRESS NO.1S | 1/2" bench, speeds (5) to 2450rpm | | £245
|
| PROGRESS NO.2GS 2MT | back geared pedestal drill | runs very well with a very strong table picture | £425 |
| QUALTERS & SMITH QDM 32 | 32mm / 3MT geared head and powered down feed drilling machine | A very nice drill less the pieces on the table picture picture2 | £1425 |
| QUALTERS & SMITH QSR 2 | radial drilling machine 3MT / 25mm capacity, spindle to column (max) 600mm, minimum 230mm, vertical traverse of arm 600mm / powered down feed, geared speeds (9) 90 - 1120rpm + brake | very nice, PLEASE NOTE; NOT CURRENTLY AT OUR WORKS picture | £2250 |
| SIP HDP600B | 1/2" 2 MT bench drill | LAST FEW ONLY // NEW | £125
|
| STARTRITE MERCURY | 1/2" bench drill | in very nice order & 240 volts picture | £245 |
| UNION BOXFORD | 1/2" bench drill | | £175
|
| VICEROY | 5/8" 2 MT pedestal drill | Quality | £245
|
| No.2 FLASH TAPPING MACHINE | 6BA up to 1/2" Whitworth - quality machine + loads of collets | 'as is' picture | £345 |
